Your customer wants "EN 1090" steelwork? The first question to ask is: in which class? For a structural steel fabricator, the execution class drives almost everything: the welding quality requirements, the coordinator's competence, how procedures are qualified, how much inspection is needed and how much traceability you keep. Yet it often arrives late, is poorly stated on a drawing, or is missing altogether.
Two standards, two roles
- EN 1090-1 is the harmonised standard for CE marking of structural components. It requires factory production control (FPC), audited by a notified body. When the shop welds, the body also issues a welding certificate stating the maximum execution class, the processes and the materials covered.
- EN 1090-2 sets the technical requirements for executing steel structures: products, preparation, welding, erection, tolerances, inspection. This is the one you open to see what a class requires for welding.
The execution class is given to you, not chosen by you
The class is specified by the designer or the client in the contract documents. It follows from the consequences of failure, the type of loading (static, fatigue, seismic) and the structure. The selection method sits in Eurocode 3 (EN 1993-1-1).
What changes for welding, class by class
| Requirement | EXC1 | EXC2 | EXC3 | EXC4 |
|---|---|---|---|---|
| ISO 3834 level | 3834-4 (elementary) | 3834-3 (standard) | 3834-2 (comprehensive) | 3834-2 (comprehensive) |
| ISO 14731 coordination | not required | required | required | required |
| ISO 5817 quality level (general case) | D | C | B | B plus additional requirements |
| Visual inspection | 100% | 100% | 100% | 100% |
| Supplementary NDT | generally none | defined rates | higher rates | highest rates |
The ISO 3834 level follows the class
This is the best-known correspondence, and it shapes the whole organisation. Moving from EXC2 to EXC3 means moving from ISO 3834-3 to ISO 3834-2: control documented end to end, with more evidence to produce.
The coordinator must match the order
From EXC2 upwards, EN 1090-2 requires welding coordination to ISO 14731. The level of knowledge expected (basic, specific or comprehensive) depends on the class, the steel group and the thickness. An EXC3 job in high-strength steel or heavy sections quickly calls for comprehensive knowledge, in other words an engineer profile. Tasks and levels are covered in our article on the welding coordinator under ISO 14731.
Fewer routes to qualify procedures
Welding is carried out to qualified WPSs (Welding Procedure Specifications). ISO 15607 offers several routes: procedure test (WPQR to ISO 15614-1), pre-production test, standard procedure, previous experience, tested consumables. The higher the class, the more EN 1090-2 closes these routes: in EXC3 and EXC4, the procedure test or the pre-production test becomes the rule. The welder qualification, WPQR and WPS chain stays the same; it is the evidence required that gets stricter.
Welders are qualified to ISO 9606-1 whatever the class. What changes is the rigour of follow-up: an expired qualification on an EXC3 weld shows up immediately in an audit.
More inspection, stricter criteria
Visual inspection covers every weld. Supplementary NDT (non-destructive testing) is set as a percentage by EN 1090-2, according to the class, the weld type (butt or fillet, transverse or longitudinal) and the loading. Acceptance criteria refer to ISO 5817. Read the notes under the tables: some imperfections and fatigue-loaded joints have their own rules.
Traceability built during fabrication
In EXC3 and EXC4, each weld must be linked to its welder, its WPS, its filler materials, the inspections carried out and, where required, the heat of the parent metal.
What SoluWeld does for you
SoluWeld keeps the register of your welder qualifications, WPQRs and WPSs and calculates their ranges of qualification variable by variable. For each weld, it shows which welders and which WPSs cover it. Weld and NDT tracking feeds the welding book and the manufacturing data book. Explore the qualifications and procedures module and welding coordination, or book a demo.