Skip to content
SoluWeld

Welding cost calculator

Filler metal, gas, flux, power and labour: the cost of a weld, item by item.

Free access, no sign-up · Same formulas as the SoluWeld software calculation module.

The software itself offers many more materials and joint preparations, and more advanced charts.

The weld
mm²

From the weld volume calculator, or entered.

Calculate my groove area
m
Process and productivity
%

Deposition rate

mm
m/min
%

Share of working time spent with the arc on. Varies widely by shop: often 10 to 30% for manual welding, higher when mechanised.

Prices and rates
€/kg
€/h
L/min
€/m³
V
A
%

100% counts arc power only.

€/kWh

Results

Enter: the area and length, Wire diameter, Wire feed speed, the operating factor

How the calculation works

Arc time = deposited mass ÷ deposition rate; total time = arc time ÷ operating factor. For a wire, deposition rate = π · d²/4 · wire feed speed · ρ · efficiency.

  • Filler metal = deposited mass ÷ efficiency × price per kg
  • Gas = flow (L/min) × arc time (min) ÷ 1,000 × price per m³
  • Flux (submerged arc) = 1 kg per kg of wire × price per kg
  • Power = U · I · arc time ÷ power source efficiency × price per kWh
  • Labour = total time × loaded hourly rate

An item with missing data is not counted as zero: it is flagged, and the total says so. Not included: preparation, tacking, grinding, inspection, or equipment depreciation.

This calculation, attached to your welds

In SoluWeld, each calculation is saved with its input data, attached to a project and a weld, and found again in the manufacturing record.