Is your best welder's qualification still valid today? If the answer means opening three binders, it is probably wrong. A welder qualification is not acquired once and for all: the test demonstrates a skill on a given date, and the standard then asks you to show that this skill is maintained. ISO 9606-1 runs two separate mechanisms side by side, the six-monthly confirmation and the prolongation. Mixing them up is the first cause of expired qualifications found in audits.
Validity runs from the test, not from the signature
The validity of a welder qualification starts on the date the test piece was welded, provided the examinations and tests are satisfactory. Every deadline is counted from that date.
Six-monthly confirmation: a skill that is no longer practised is lost
Every six months, the employer, the welding coordinator or the examiner confirms on the certificate that the welder has kept welding within the scope of the qualification, with no interruption longer than six months.
The question is precise: has the welder welded with this process, within the range of the qualification, during the period? A welder qualified in 141 on pipe who has only done 135 on plate for six months has maintained nothing of the 141 qualification. What "range" means is detailed in the article on the ISO 9606-1 range of qualification.
The confirmation attests continuity of work. It is neither a check of weld quality nor a prolongation.
Prolongation: three options, to be chosen and written on the certificate
Beyond the initial period, ISO 9606-1 offers three ways to prolong a qualification. The option chosen is stated on the certificate.
| Option | Principle | Who carries it | What it costs |
|---|---|---|---|
| a) New test | The welder takes a new test every three years | Examiner or examining body | Shop time, material and testing |
| b) Production verification | Every two years, prolongation based on recent production welds of the welder, tested by volumetric examination or destructive testing | Examiner or examining body | Welds identified, tested and traced |
| c) Maintained within the quality system | Validity maintained as long as the welder works for the same manufacturer, certified to ISO 3834-2 or ISO 3834-3, and the welder's production welds are of acceptable quality | The manufacturer, under its welding coordination | A maintained certification and up-to-date records |
What to take from it:
- Option a requires no production records. It suits welders who change employers often.
- Option b rests on evidence: without welds identified, linked to their welder and to their inspection report, it cannot be justified.
- Option c is the lightest day to day, but it is tied to the employer and its certification. If the ISO 3834 certification lapses, the prolongation lapses with it, and the qualification does not follow the welder to another company.
In every case the six-monthly confirmation remains due. The options add to it, they do not replace it.
Options b and c both rest on the link between a weld, its welder and its inspection: that is the role of weld mapping and the manufacturing data book. And an up-to-date qualification justifies a weld only if the rest of the welder qualification, WPQR and WPS chain holds.
Revocation: a technical decision, not a sanction
A qualification can also end before its deadline. When there is a specific reason to question a welder's ability to make compliant welds, the qualifications covering the work in question are revoked. The welder's other qualifications, which are not in doubt, remain valid.
Repeated defects found by non-destructive testing on the same welder's welds, or a departure from the WPS (Welding Procedure Specification), are typical reasons. The decision is justified, dated and recorded. The welder can then be requalified by a new test.
The temporary welder
A temporary welder arrives with qualifications obtained elsewhere. The new employer can only confirm the period during which it saw the welder at work: for the earlier period, evidence must come from the previous employer or the agency. A qualification prolonged under option c at another manufacturer does not transfer as it is.
How SoluWeld helps
SoluWeld records for each welder qualification the test date, the prolongation option and the six-monthly confirmations, and calculates the resulting deadlines. Alerts are shown on a dashboard per welder. The link between production welds, welders and non-destructive testing provides the evidence for options b and c. Details are on the qualifications and procedures page. For staffing agencies, see staffing agency access. You can also book a demo.