All articles
Welding standards, processes, metallurgy and calculations, explained by an IWE. Filter by level or by topic.
12 article(s)
- 5 min
- Expert
- Metallurgy
- Calculations
Preheating steel: determining it under EN 1011-2
Carbon equivalent, diffusible hydrogen, heat input, combined thickness: how EN 1011-2 sets the preheat temperature of steel, and why an element missing from the mill certificate is not zero.
Read the article
- 4 min
- Intermediate
- Quality
The quality levels of ISO 5817
Level B, C or D: what ISO 5817 sets, where the required level comes from and how it translates into acceptance criteria for non-destructive testing.
Read the article
- 4 min
- Beginner
- Quality
- Process
Common weld defects
Cracks, porosity, inclusions, lack of fusion, undercut: the most common weld defects, what causes them on the shop floor, and the setting or technique that makes them go away.
Read the article
- 4 min
- All readers
- Quality
- Training
The welding coordinator under ISO 14731: tasks, knowledge levels and responsibilities
Who decides what about welding in your shop? The coordinator's tasks under ISO 14731, the three levels of knowledge, the written appointment, and the choice between in-house and outsourced coordination.
Read the article
- 5 min
- Beginner
- Quality
Weld mapping and traceability: from the drawing to the data book
Identify every weld on the drawing and link it to the welder, WPS, materials, inspections and repairs: traceability that stands up to an audit, and a data book built during production rather than after it.
Read the article
- 4 min
- All readers
- Calculations
- Process
Estimating the cost of a weld
Filler metal, gas, electricity, labour: how to break down the cost of a welded joint, why time weighs the most, and which levers reduce it.
Read the article
- 5 min
- Intermediate
- Quality
Prolonging an ISO 9606-1 welder qualification: six-monthly confirmation, prolongation, revocation
Six-monthly confirmation, three prolongation options, revocation, evidence to keep: how to keep an ISO 9606-1 welder qualification valid, and what makes it lapse.
Read the article
- 7 min
- All readers
- Calculations
Weld volume calculation for a groove and filler metal mass
Cross-sectional area, volume, deposited mass, then filler metal to order: the complete method for square, V, single-bevel, X, K grooves and fillet welds, with a step-by-step worked example.
Read the article
- 4 min
- Intermediate
- Quality
EN 1090: what the execution class changes for welding
EXC1, EXC2, EXC3 or EXC4: who sets the execution class, and what it requires from the shop in ISO 3834 level, coordination, procedure qualification, inspection and traceability.
Read the article
- 5 min
- Intermediate
- Quality
ISO 3834: choosing the right level of welding quality requirements
ISO 3834-2, -3 or -4: how to pick the right level of quality requirements for fusion welding, and what an auditor actually checks on the shop floor.
Read the article
- 5 min
- Intermediate
- Quality
ISO 9606-1 range of qualification: what a welder qualification really covers
Process, plate or pipe, butt or fillet, filler material, thickness, diameter, positions, weld details: how to read the range of an ISO 9606-1 welder qualification, and the traps that keep coming up in audits.
Read the article
- 3 min
- Beginner
- Quality
- Training
WPS, WPQR, welder qualification: understanding the welding qualification chain
WPS, WPQR, welder qualification: who qualifies what, in which order, and why every weld must be traced to a supported procedure and a qualified welder.
Read the article